PDA

View Full Version : Sunroofdeflector



gerby77
04-21-2009, 09:01 PM
Hey guys,

just got a sunroofdeflector and now are wondering how to get it onto my car ;-)

Shadowlife25
04-21-2009, 09:08 PM
did it come with a mounting kit? Pics?

grayscale
04-21-2009, 09:23 PM
IIRC, the deflectors have little metal tabs that clip onto the sunroof crack and the deflector screws onto the tabs.

gerby77
04-21-2009, 09:24 PM
have no pictures yet, but it came from Billy Gunn.
He's on the forum too.
It has 2 screw, so i thing i will have to drill some holes, or...

gerby77
04-21-2009, 09:26 PM
IIRC, the deflectors have little metal tabs that clip onto the sunroof crack and the deflector screws onto the tabs.

what? ;-)

you mean the sunroof crack is the metal piece that pops up when the roof open?

grayscale
04-21-2009, 09:34 PM
No, I just mean the gap between the sunroof and the roof. The tabs go down through gap a little and curve around onto the underside of the roof part, not the sunroof part that moves. If you clip it to the sunroof itself then the deflector would move.

Shadowlife25
04-21-2009, 09:43 PM
This does not require any holes to be drilled. ;)

gerby77
04-21-2009, 09:45 PM
No, I just mean the gap between the sunroof and the roof. The tabs go down through gap a little and curve around onto the underside of the roof part, not the sunroof part that moves. If you clip it to the sunroof itself then the deflector would move.

aha, mmhhh, i will have to check that, but i think i'm missing something.
And that's a good thing you're pointing at ;-) it would move yeah.
But i think i made a good buy, payed 17$ for it without shipping, but i got some other stuff so it counts

gerby77
04-21-2009, 09:49 PM
This does not require any holes to be drilled. ;)

i was hoping lool

but it should hold with only the screws and the bolds? ;-)

grayscale
04-21-2009, 11:22 PM
aha, mmhhh, i will have to check that, but i think i'm missing something.
And that's a good thing you're pointing at ;-) it would move yeah.
But i think i made a good buy, payed 17$ for it without shipping, but i got some other stuff so it counts
Sounds like a good buy to me.

grayscale
04-21-2009, 11:23 PM
but it should hold with only the screws and the bolds? ;-)
Yes it will hold if you have the screws and tabs.

gerby77
04-22-2009, 03:32 PM
Yes it will hold if you have the screws and tabs.

No scratches on the paint? ;-)

grayscale
04-22-2009, 05:58 PM
No

gerby77
04-22-2009, 07:49 PM
well i just checked and the screws are missing 1 - 1.5 cm to short to get there where i want them ;-)

gerby77
04-24-2009, 06:09 PM
But checked with the seller, he will send me the missing parts ;-) 2 "hooks"