PDA

View Full Version : interior fiberglass?



kgumaer
04-04-2009, 05:14 PM
i have an 02 celica gt with a stock interior~ i want to get it fiberglassed black but i don't know where to start or what to do. I also don't know of any shops that do the work or how much it would cost to get my whole interior done? any suggestions?

KM
04-04-2009, 06:15 PM
...wait, why are you fiberglassing?
Are you doing new contours or putting in speakers?

If you're just aiming for the color, I suggest you pull out everything, clean it up with a nice degreaser, and paint it.

joe's gt
04-04-2009, 07:49 PM
paint or dye is your best bet i think.

KM
04-04-2009, 08:41 PM
http://duplicolor.com/products/vinyl.html

I used this stuff when I redid my interior. It (obviously) is for vinyl and fabric interiors.

I'm just going to point out that you really do need to pull out your entire interior and clean it with a good degreaser or prep wipe, unless you want uneven coats and paint all over your glass.


There shouldn't be a need for fiberglass.

taibones
04-04-2009, 11:22 PM
if you want a custom panel then let me know i have done alot of fiberglass its not so hard it just take time

kgumaer
04-05-2009, 02:25 AM
i found some pics on the net of celicas with fiberglasses dashes/interiors. i love the way it looks and thats why i wanted to get it done. There's really not a need for it, just really like the look.

http://www.superstreetonline.com/featuredvehicles/130_0501_2002_celica_gt_widebody/index.html

thanks for the advice!

KM
04-05-2009, 03:55 AM
Geez. They have 4 amps mounted in the headliner.
I didn't even think that was possible.

taibones
04-05-2009, 11:10 PM
its easier then one would think it just takes some time

EXQUIZITCELICA
04-06-2009, 06:51 PM
TIME CONSUMING.... but if you just want the interior paneling fiberglassed, its easy.. Once you start doing contours and designs is where it gets hard.

sand paper, primer, paint and clear.... thats about it...