PDA

View Full Version : 92 celica gts, swapped in 3sgte, need some help with mr2 trans install



celica1150
02-23-2009, 07:56 AM
Hey, last summer i built a 92 gts, built the car from the ground up from the shell,swapped in a jdm 3sgte motor. It will be getting paint before this summer. I currently have the 5sfe tranny in it, but I can get a 93 mr2 (lsd) tranny for $200, nothing wrong with it. I was wondering what I would need to use this tranny? and what about the shifter being on the front the of tranny? Any help is greatly appreciated. Thank you.

METDeath
02-23-2009, 12:17 PM
You need custom shift cables, as I recall. Beyond that, I'm not sure as I've not done it myself.

Murgatroy
02-23-2009, 02:16 PM
You won't need custom shift cables.

You need to use the ST185 shift cables and brackets.

There is a write-up covering this in the Forced Induction forum.

celica1150
02-23-2009, 07:32 PM
Hey thanks found the write up.