View Full Version : how to remove T18 door panel?

02-11-2009, 01:08 PM
Hi everybody,

I want to change the light-color of my window-buttons (green to blue), so i guess i'll have to remove the entire door panel? i just don't know how, can't find the correct information here :s

I have taken a picture with the screws I removed but now I don't know what to do anymore. Can anyone help me or find a toppic where it is explained?




02-11-2009, 01:16 PM

In detail. :D ;)

02-11-2009, 01:34 PM
Not the same door panel (has a lot of more screws), but ill start with removal of the courtesy light :)


02-11-2009, 01:48 PM
I removed the screw under the courtesy light and another screw in central, the toppic says 'next, pull up and backwards. Well, that isn't happening : P

02-11-2009, 03:40 PM
I found a lot af clipses that i popped out, but still it's not entirely out. It looks like I have to remove the 'door lock' switch because it seems that there's a swrew-clip behind it. Is that possible? I do nog want to break the door lock switch...

02-11-2009, 04:17 PM
Follow my write up. ALL of the screws that hold the door panel in place are the same. The only ones you don't have to worry about are those that pertain to the System10.

02-11-2009, 04:23 PM
Remember, you pull outward from the bottom of the door panel, then up. :)

02-11-2009, 04:34 PM
Its not the same door panel I think... I can grab my hands under the panel but when i pull its stuck like 4 inches upwardsto central down, is there another clip? Also the top left corner (picture) doesn't come lose. Maybe I have to pull harder but I'm scared to break anything.

02-11-2009, 06:46 PM
i found how to do it. there are 3 extra screws that need to be removed. like i said, it's not the same panel.


02-13-2009, 03:28 PM
Haha, good job. I KNEW I forgot to outline something.... grrr.

The top two you have circled are there as well. The lower one is for the nonsystem10 panel. :)

Thanks for the info!