PDA

View Full Version : O2 Sensor Move for Cone Filter..



balang_479
01-20-2009, 05:54 PM
Hi i plan on installing a cone filter instead of my air box and then building a new airbox around it but the O2 Sensor is on the stock air box...

should i move it so that it sticks directly into the intake pipe or should it be a little bit out so that it doesnt intervene with the air flow?

k.beaty
01-20-2009, 06:05 PM
the sensor in your airbox now should be your mass air flow sensor, not the O2 sensor. you should have it directly in the intake pipe

balang_479
01-20-2009, 06:11 PM
oh right ok, mass air flow... so if i put it where the diaphragm was in the air flow it be ok?

Gary
01-20-2009, 06:15 PM
You are talking about the intake air temperature sensor.
You can mount it in the intake pipe.
You will not notice the difference.

k.beaty
01-20-2009, 06:17 PM
^+1

just drill a hole in your intake tube for the sensor to go in.

balang_479
01-20-2009, 07:38 PM
cheers guys.