PDA

View Full Version : 4afe manifold question.



zmile06
12-09-2008, 12:06 PM
I'm thinking of keeping my manifold and replacing the gaskets and studs. I doubt manifolds go bad often they are heavy duty of course... My question is whats the part number for the studs. And does it require 2 or 3 studs? I might get it from patsamerica.com or something, can someone help me out on finding the correct parts? Thanks.

zmile06
12-09-2008, 12:13 PM
Update i need a flange gasket to seal the down pipe to the manifold correct? I'm guessing thats the name of the small o-ring gasket. that sits there. let me know guys =)

DaneDog311
12-09-2008, 12:44 PM
I don't recommend cheap exhaust studs as they could snap in the head and leave you with a pita...

Partsamerica/advanced auto/kragen

Exhaust Studs
http://www.partsamerica.com/productdetail.aspx?MfrCode=RNB&MfrPartNumber=03105&PartType=725&PTSet=A

Bolts and Studs
http://www.partsamerica.com/productdetail.aspx?MfrCode=DOR&MfrPartNumber=03400&PartType=725&PTSet=A

Manifold to Cat
http://www.partsamerica.com/ProductDetail.aspx?MfrCode=FEL&MfrPartNumber=23626&PartType=97&PTSet=A

Cat to exhaust
http://www.partsamerica.com/ProductDetail.aspx?MfrCode=FEL&MfrPartNumber=60908&PartType=97&PTSet=A

Hope this helps

DaneDog311
12-09-2008, 12:45 PM
P.S. 92 4afe was used as my reference... shouldn't make either way though

zmile06
12-09-2008, 11:43 PM
I don't recommend cheap exhaust studs as they could snap in the head and leave you with a pita...

Partsamerica/advanced auto/kragen

Exhaust Studs
http://www.partsamerica.com/productdetail.aspx?MfrCode=RNB&MfrPartNumber=03105&PartType=725&PTSet=A

Bolts and Studs
http://www.partsamerica.com/productdetail.aspx?MfrCode=DOR&MfrPartNumber=03400&PartType=725&PTSet=A

Manifold to Cat
http://www.partsamerica.com/ProductDetail.aspx?MfrCode=FEL&MfrPartNumber=23626&PartType=97&PTSet=A

Cat to exhaust
http://www.partsamerica.com/ProductDetail.aspx?MfrCode=FEL&MfrPartNumber=60908&PartType=97&PTSet=A

Hope this helps
Thats the gasket that sits from the manifold to the down pipe right? The manifold to cat? OR what is the gasket that sits there? I need to make sure so i don't special order it and then I'm screwed