PDA

View Full Version : What kind of Oxygen sensor for 98 camry header?



liplip
10-14-2008, 05:12 AM
I have the header, gasket....i just need the O2 sensor.What kind of O2 sensor do i need to put the header on my 90 celica gt?

grayscale
10-14-2008, 05:48 PM
You need the one that has threads on it, not like our stock one that has a flange on it. Not sure what parts stores you have there, but your best bet is to go down there and see what they have or can get for your 90 and see if any of those will work first.

ciento44
10-14-2008, 06:07 PM
You can get a universal bosch at Autozone for about $40 i believe. Just make sure it has 4 wires

Hookecho
10-14-2008, 11:47 PM
i just used the stock o2 sensor from my old manifold. i backed the studs out of the o2 port from the old manifold and welded them on the camry manifold. then bolted the sensor on.

grayscale
10-14-2008, 11:49 PM
You can get a universal bosch at Autozone for about $40 i believe. Just make sure it has 4 wires
The 98 Camry sensors are 4 wire, but I didn't think you'd need that. All of mine have only been 2 wire and you really only need one of those. Have yours had 4 wires?

Hookecho
10-14-2008, 11:57 PM
the one Ben sent me had a 4 wire sensor on it. i hooked up each wire to my existing harness and never got a reading on the a/f meter. which is what lead me use the stock one.

ciento44
10-15-2008, 03:12 PM
The 98 Camry sensors are 4 wire, but I didn't think you'd need that. All of mine have only been 2 wire and you really only need one of those. Have yours had 4 wires?


I didn't read the post. :(

I just saw 98 camry and went to town. :wiggle:

The 98 camry has a 4-wire.

The Bosch unit that he actually wants in this case is a universal 1-wire. Still $30-$40 at Autozone.

celica9303
10-15-2008, 06:02 PM
Search for my thread write up on my install for the 98 camry header the bosch p/n is in there along with any other info you may need.