PDA

View Full Version : Celica AT180 with 4A-GE engine



Trol
09-16-2008, 02:36 PM
Hi!:)
I want to ask you what i have to change and do to put in my car 4age engine from MR2 AW11 now i have 4afe!
I have ECU engin gearbox hole elektrical!what else i'm going to need to finish this projekt with no problems!
FACT my gearbox is C52 and this from MR2 is also C52 but i also have one gearbox from celica 7th gen ZZT23 6 speed manual C64!I'll try to put C64 But i'm not sure that every thing will fit!
So plese tell me you ideas! :??: :??: :??:
So you can see diferens between the gearboxes C52 and C64 here http://en.wikipedia.org/wiki/Toyota_C_transmission#C52

I thing the engine wiring are allmost the same for 4A-FE and 4A-GE!
And i can't find nothing for this project so please help me!

Colossus20v
09-16-2008, 03:02 PM
If you have everything such as engine, ecu, electrical, you should be fine. I am not sure what axels you would need with the C64, but if you can use the same as your 4afe then you should be fine.

Make sure you have your ignitor and coil for the ignition. Then just make your harness. You may also need to extend some wires because the MR2's may be shorter. Unless you put the ECU in the engine bay.

But it sounds like you have pretty much everything you need.

Trol
09-16-2008, 03:38 PM
you mean that i have to use disributor from 4afe and put it on 4age!But im not sure thas the connectors are the same i mean the disributo connector couse on 4afe every thing is is the distributor ,but on 4age there is a crankshaft position sensor thas why an not shure it will fit perfect!
And i'm tolking fot 4age 16v

90CelicaST
09-16-2008, 03:48 PM
http://www.mk1point5.com/6speed.htm It should be close, though, the C64 came out of the Elise/Exiges, so the shift selector may be different.

Trol
09-16-2008, 04:02 PM
http://www.toymods.net/forums/showthread.php?t=20200

http://www.corolland.com/forums/lofiversion/index.php/t17494.html

http://www.aeu86.org/index/engine-4age-to-7age-conversion/cat/9/topic=4156/post=60902


http://www.aeu86.org/forum/viewtopic.php?t=1064&highlight=7age

http://www.tamparacing.com/forums/toyota-tech/214540-4afe-7afe-help.html

http://www.club4ag.com/ here try to find in

Technical Guides and Tuning Tips
4A-GE 16V / 4A-GZE / 4A-GE 20V Specifications and ECU Data
Frequently Asked Questions
Past Articles and Galleries
Important Notes:

4A-GE History and Family Tree by Richard White
4A-GZE Transplanting Guide
5A-GE and 7A-GE
AE82/ 92 Corolla Front Drive Light Tune Guide
AE86 and Installing 20V 4A-GE
AE86 Corolla Light Tune Guide
AE86 Wheel Guide

when you open the link club4ag enter in 4a-ge 20v an then look for 5age ang 7age

check these links for your project
but i can't find something like this fot my!

Colossus20v
09-16-2008, 05:08 PM
http://www.toymods.net/forums/showthread.php?t=20200

http://www.corolland.com/forums/lofiversion/index.php/t17494.html

http://www.aeu86.org/index/engine-4age-to-7age-conversion/cat/9/topic=4156/post=60902


http://www.aeu86.org/forum/viewtopic.php?t=1064&highlight=7age

http://www.tamparacing.com/forums/toyota-tech/214540-4afe-7afe-help.html

http://www.club4ag.com/ here try to find in

Technical Guides and Tuning Tips
4A-GE 16V / 4A-GZE / 4A-GE 20V Specifications and ECU Data
Frequently Asked Questions
Past Articles and Galleries
Important Notes:

4A-GE History and Family Tree by Richard White
4A-GZE Transplanting Guide
5A-GE and 7A-GE
AE82/ 92 Corolla Front Drive Light Tune Guide
AE86 and Installing 20V 4A-GE
AE86 Corolla Light Tune Guide
AE86 Wheel Guide

when you open the link club4ag enter in 4a-ge 20v an then look for 5age ang 7age

check these links for your project
but i can't find something like this fot my!
Thanx for all of the links. I have most of those already saved in my favorites.

You wont find a lot of stuff like that for celicas period. Thats just the nature of the beast. People dont swap 4age engines into celica very much, usually its a 3sgte or something else.

I wasnt saying that you should swap any parts between the 4afe and 4age, like distributor or anything. You will have to rewire the car for the 4age instead of the 4afe.

I am not sure what specifically you want information on.

Trol
09-16-2008, 09:15 PM
Yes i know that i'm going to need hole wire set for 4age witch i allready have but i want to find what is the diferent between two wire sets for 4afe and 4age

Trol
09-19-2008, 02:41 PM
what abouth the A/c conections