View Full Version : Celica AT180 with 4A-GE engine

09-16-2008, 09:48 AM
I want to ask you what i have to change and do to put in my car 4age engine from MR2 AW11 now i have 4afe!
I have ECU engin gearbox cables!what else i'm going to neet to finish this projekt with no problems!
FACT my gearbox is C52 and this from MR2 is also C52 but i also have one gearbox from celica 7th gen ZZT23 6 speed manual C64!I'll try to put C64 But i'm not sure that every thing will fit!
So plese tell me you ideas! :??: :??: :??:

09-16-2008, 11:16 AM
So you can see diferens between the gearboxes C52 and C64 here http://en.wikipedia.org/wiki/Toyota_C_transmission#C52

I thin the engine wires are allmost the same fot 4A-FE and 4A-GE

10-07-2008, 09:46 PM
A 4AFE to 4AGE swap is pretty useless unless your doing alot of modding to the 4AGE (high hp NA, supercharge, or turbo). But I wish you luck anyway.

As far as I know the C64 should bolt right up to the chassis. But Im not completely sure as far as bolting to the 4AGE or what other modifications needed to be done. One guy on the MR2 board did the conversion to his MR2... so you can get an idead from that: http://www.mr2oc.com/showthread.php?goto=newpost&t=280058. Just ignore all the shifter modifications for the AW11 MR2 since the linkage moves in reverse to an AT180 Celica.