PDA

View Full Version : I need help pls ( Clutch problem)



88CelicaGtS
07-29-2008, 05:30 AM
Hey guys i jus bought a 88 celica with 3gste and theres somethin wrong with the clutch or the trans. When i put my car up on the jack and i turn my car on and when i put the gear in while holding the clutch my wheels are spinning and when the car is down i cant put it into a gear. I bleeded the cluch and i changed the slave cylinder and still the same. Can you guys help me?

Rick89GTS
07-30-2008, 04:06 AM
Are you saying you have the 3SGTE (turbo) swap and not the stock 3SGE in your GTS?

Have you checked the clutch master cylinder?

88CelicaGtS
07-30-2008, 05:07 AM
yes i got the 3SGTE (turbo) swap and i didnt check the clutch master cylinder yet but im thinkin it is the release bearing but i might be wrong. so i just need some suggestions.

Slider
07-30-2008, 06:54 AM
If the slave is pushing back the release fork far enough I'd put my money on something being wrong with the actual clutch, the clutch spring or something else might have popped out and is holding it engaged or it's the release bearing. Those are my guesses. Either way you'll have to take out the tranny.

88CelicaGtS
07-30-2008, 12:05 PM
yea im going try to take the tranny out today so ill see whats going on.