PDA

View Full Version : 3 gen ignition parts on 2 gen



quark
07-21-2008, 07:38 PM
Can I put this set on my 2 gen engine?
http://cgi.ebay.com/ebaymotors/MR2-IGNITION-KIT-WIRES-CAP-ROTOR-TURBO-3SGTE-93-95_W0QQcmdZViewItemQQcategoryZ33692QQihZ024QQitemZ 370069877443QQrdZ1QQsspagenameZWDVW

RedRkt01
07-21-2008, 07:49 PM
I'd check the part numbers on the cap & rotor..........2g and 3g heads are slightly different. If you don't get it let me know bc I need a new 3g cap & rotor.

Luni
07-21-2008, 07:54 PM
It will work.

The distributors are all the same. That stuff is actually from a gen2 anyway. Thats USDM 93-95 MR2 stuff, or 92+ celica stuff. Same cap, wires, rotor.

RedRkt01
07-21-2008, 08:00 PM
The distributors are all the same.

Nice!

burnyd
07-21-2008, 08:16 PM
dizzys are the same... the only thing that will not work is from the dizzy to the coil that wire will need to be from a 90-92 or 93+ whatever year the coil will is...