PDA

View Full Version : quck question...



tekstep01
06-02-2008, 08:10 PM
my drive pully has a nice chip in the power-steering part of it on the side of the motor...its long but not deep.... can i sand off the sharp edge and keep it on there for a month or so till i get my "budget" back up to normal... this waterpump failure set me back 300 in parts... and general upkeep so-far!

:bowdown: -=~LONG LIVE THE HATCHI'~=- :bowdown:

extremeskillz
06-02-2008, 08:17 PM
Yes, use a dremel if you can to file it down. this should hold you over until you replace it.

ciento44
06-02-2008, 08:20 PM
my drive pully has a nice chip in the power-steering part of it on the side of the motor...its long but not deep.... can i sand off the sharp edge and keep it on there for a month or so till i get my "budget" back up to normal... this waterpump failure set me back 300 in parts... and general upkeep so-far!

:bowdown: -=~LONG LIVE THE HATCHI'~=- :bowdown:

I'd just leave it if it's going to be for a month. You talking about the pulley or the belt?

tekstep01
06-02-2008, 09:13 PM
pully its self.... ah i checked out for prices... looks like im going to the wrecking yard....
thats one they dont stock anywhere.....