View Full Version : Compatible hubs for changing bolt patern

02-27-2005, 10:22 PM
Anyone have an idea of what hubs can be swapped into the 5th gen celica to change the bolt pattern? Perhaps the name of the manufacture of the stock hubs may be a decent source.

02-28-2005, 02:29 AM
What do you want to change it to?

02-28-2005, 02:43 PM
Preferably 5x114.3.

02-28-2005, 06:47 PM
Avalon or Solara Fronts &
MR2 Rears

Just an idea.

03-02-2005, 09:50 AM
then u gotta change out at least the brake disks

03-02-2005, 10:03 AM
Wouldnt it be easier to get some hub adaptors to change your bolt pattern???

03-02-2005, 01:13 PM
I could probably make some hub adapters up.

03-02-2005, 03:02 PM
then u gotta change out at least the brake disks

I am building a brake kit using the proper rotor hats to go with it. I would rather not use hub adapters for various reasons. The hard part is finding hubs to swap.

Adrian Avgerinos
03-04-2005, 04:44 PM
Good luck with finding out the information you need. The easiest way to find out the answer is to purchase hubs for your car and then ones from something else, like a supra, and measure.

A hub adapter would probably easier in the event that nothing swaps over directly. However, I would suggest starting your search with the MR2 Turbo since the inside splines are the same as the celica and it utilizes a 5x4.5" bolt pattern.