View Full Version : Rims

04-20-2008, 03:16 AM
I've been checking craigslist for used rims lately, and finally found some that might work for me.


$350. 16x7, 5x100 bolt pattern. 16 lb for each rim. What do you guys think? And what will I have to do for an offset to make it flush with the body?

Here's another pair I ran into. Not much info on these. Just that they are 16x8.


04-20-2008, 03:36 AM
I'd definately go with the first set you posted up. I think they'd look good, and 16 lbs. is pretty damn good for $350.

I also think there might be some fitment issues on with a 16x8 on a narrow body. I run 17x7's on mine, and don't have too much room to spare.

04-20-2008, 04:09 AM
the second set won't fit (5x4.5)

04-20-2008, 04:51 AM
First one it is then. So the 16x7's should be pretty flush, like my stock ones?

04-20-2008, 05:19 AM
Depending on the offset.

04-20-2008, 05:41 AM
the second set won't fit (5x4.5)

yep, typical ford pattern is 4.5, so they wont fit. In millimeters its 5 x 114.3. Besides, I think the 1st set will look better

04-20-2008, 05:45 AM
If you are still looking I have a set of 17x8 DR-17 Drags, +40 mm offset, that are brand new in the boxes that I would sell for $400 + shipping.

04-20-2008, 06:08 AM
Hmm, how much would shipping run to 67005?

And I didn't see anything about the offset, unless ET:33 is another way of stating the offset.

04-20-2008, 06:14 AM
Yep, 33 is the offset.
They will look OK on the front.
On my car (widebody), I need 25mm spacers to make them sit flush in the rear.
My wheel are also 16x7 but with 30 offset.


04-20-2008, 06:14 AM
I would have to check, and ET:33 looks like it might be the offset for those other ones.

04-20-2008, 04:05 PM
Alright, well mine's a narrowbody. So if the front is alright, then the rears should be good too. Thanks guys.