PDA

View Full Version : custom manifold parts



85gtsblackman
04-04-2008, 12:58 PM
ive serched the site and all over google, does anyone have the website that hs the parts to build your own intake manifold, i cant find it anywhere

Gary
04-04-2008, 01:12 PM
http://www.rossmachineracing.com/extrusionhouse.html

85gtsblackman
04-04-2008, 06:57 PM
thanks, theres another one but i cant seem to find it, they had injector bosses, j bend type runners and whatnot

similar to whats found herelink (http://toyotaperformance.com/intake.htm)

grayscale
04-04-2008, 11:48 PM
http://www.rossmachineracing.com/extrusionhouse.html
Bookmarked.:bigthumbu

85gtsblackman
04-05-2008, 12:02 AM
well ill probally end up using parts off the 1st site

and use the stock bottom section of my manifold from where it meets the head, and cut it right after the injector ports and thermostat housing, yes the 22re t stat housing is on the intake manifold :thumbsdow

Magnum
04-28-2008, 12:40 AM
http://www.wasabigarage.com/DIY_intake.html
custom surge tank plenum
http://www.velocity-of-sound.com/
Velocity stacks and bell mouths.

donteatbugs
05-09-2008, 04:57 AM
i was thinking of making something like ats just made only in side feed style. cut the surge tank off the runners, clean the runners up a bit and put a bigger surge tank on with a custom q45 flange. i just need to find someone to weld aluminum for me that cares about cars. there are also some good designs coming out at mr2oc in the vendor section.