PDA

View Full Version : piston part number or spec for 3sgte stroker?



jas3113
02-21-2005, 08:33 PM
I am new to the 3sgte motor.

I've been searching for specs a part number or a work order number for a set of pistons for a 3s with a 5s crank.

Any help is appreciated. TIA

John

skreem
02-22-2005, 12:10 AM
your going to have to get your crankshaft ground down to 3sgte spec and then get custom rods for a 3sgte with the length of 5sfe rods

jas3113
02-22-2005, 02:33 AM
your going to have to get your crankshaft ground down to 3sgte spec and then get custom rods for a 3sgte with the length of 5sfe rods
Based on the info I found i can ground down the 3s rod journals and use stock or aftermarket rods for a 3SGTE.

BTW found the part number from CP Pistons on the Pistons.

John

BraveUlysses
02-22-2005, 04:19 AM
Check around on mr2oc.com; more and more mr2 guys are building up stroker motors these days.