PDA

View Full Version : motor mounts



3DZ
05-19-2007, 07:49 AM
could some one please confirm that a 1990 GTS and 1991 All trac have the same motor mounts. and is automatic tranny mounts the same as manual?

Slider
05-20-2007, 05:29 AM
I know the front mount is the same on the AllTrac and 5sfe Celica both being manual. The rear is different. Sorry I don't know more than that

Shadowlife25
05-20-2007, 12:44 PM
If you're asking for the purposes of getting poly inserts, then you can use the same ones. As for entire motor mounts then I do believe there are differences.

3DZ
05-20-2007, 06:07 PM
i have a GTS parts car and if the mounts are interchangeble, i'll fill them with poly myself.

NDMstang65
05-20-2007, 06:36 PM
Font mount off of a 5sfe has a longer distance between the bolt holes than the alltrac one (as per my alltrac cross member)...but nothing a drill couldn't fix.

Slider
05-21-2007, 04:49 AM
Font mount off of a 5sfe has a longer distance between the bolt holes than the alltrac one (as per my alltrac cross member)...but nothing a drill couldn't fix.

Are you sure you're not talking about the rear mount? The front mount is actually the exact same part number between the 5th gen AllTrac and the 5th gen GT/GT-S

NDMstang65
05-21-2007, 06:32 AM
Wasn't the same on the car that i took out, none of them were. I had the ST and a GTS apart at the same time, none of the holes would line up for the front mount on the alltrac cross member, they were all longer. Isn't a big deal, it'l still bolt in you just have to drill a hole in the mount itself and use a different bolt.

3DZ
05-21-2007, 06:55 AM
how about the other 3 mounts are they the same part numbers?

KoreanJoey
05-21-2007, 02:32 PM
Wasn't the same on the car that i took out, none of them were. I had the ST and a GTS apart at the same time, none of the holes would line up for the front mount on the alltrac cross member, they were all longer. Isn't a big deal, it'l still bolt in you just have to drill a hole in the mount itself and use a different bolt.

Yeah the front was different on my GT in comparison to the GT4, the rears were the same.

3DZ
05-26-2007, 05:16 AM
ok final verdict. the front ones are different.
the mounting holes to the subframe is wider on the 5sfe.
just needed to be drilled and tapped.