View Full Version : yay i get to work on the 3rd gen again

10-14-2006, 09:09 PM
so lets see, so far ive only pressure washed the engine bay , but heres my plans

sleave front crank pully, replaced seal, still leaks :rant:

possibly pull oil pan and reseal it, someone put a cork gasket on it and i can tell if its bad as well due to crank pully leaking like a mofo :madfawk: , motherf'ing oil leaks from hell :madfawk: :rant:

while car is in the air, flush, drain and fill coolant, with 180 degree thermostat and new seal,

drain and fill rear diff, damn gotta try n find my 24mm again

let see how much my bad arm is gonna hurt :ghey: :rant: :ugh:

not looking forward to this either

thank god this thing is rwd

10-14-2006, 10:47 PM
good luck, have fun with the gear oil. My oil pan leaked also. but it was loose. hehe.

10-14-2006, 11:37 PM
k check this out

it was the lil 10 mm in the t chain cover that was loose right above the front main making it seam like the front main was leaking

who ever put this engine back togather was no genious, all the lower t chan cover bolts were loose

sleaved the stupid pully anyway,

flushing radiator, twas a bunch of shit in it, someone drilled 2 holes in the old thermostat

got rid of my miss fire, smacked the tps with a ling 14mm wrench, started idling normally again

hoping to get to the rear end before dark

10-16-2006, 03:44 PM
its not a **** if it doesnt leak oil

10-16-2006, 03:44 PM
what the **** ?

10-16-2006, 03:45 PM

10-16-2006, 03:46 PM
I :heart: Ctech

10-16-2006, 10:11 PM

doing rear end tomarrow along with custom door 6.5 speakers