PDA

View Full Version : SMT6, here I come.



Snafu
01-17-2005, 05:39 PM
Well, after a lot of thinking, SMT6 is in my near future.

I'm selling the megasquirt and the MSD, and in all reality, SMT6 (W/ map) is only going to set me back another 100 bucks.

Look for a complete write-up in the future, as well as a full custom turbo kit install writup too!

If anybody has specific wiring diagrams for a 1990 4afe Celica, could somebody scan them? I have the ones in the back of my Haynes manual, but I'm sick of trouble shooting and hacking up my harness.

Thanks,

Colin

Fox-N-It
01-17-2005, 08:06 PM
Were you running squirt and spark? Might be intrested in the MSD.

Snafu
01-17-2005, 08:54 PM
Squirt only. PM me if you're interested.

Weasy2k
01-22-2005, 06:49 AM
Send me some wiring diagrams i can make you a complete wire diagram in short time. That in theory should get you going if it works out!

Snafu
01-23-2005, 12:49 AM
Yeah. I'm for sure trying to get the wiring diagrams. I'm gunna stop by Toyota tomorrow and see if one of my buddies can let me borrow it for about 10 mins so I can scan it.

Weasy2k
01-23-2005, 02:19 AM
sweet, ill get that done after i finish the beams 3s-ge diagram

Snafu
01-23-2005, 03:37 AM
Rock'n man. I actually just bought a dealer manual for 55 bucks off my buddy. I'll scan them and post them up within the next week or so. Thanks,

Colin

Weasy2k
01-23-2005, 03:51 AM
no rush...fire them off to johnny@sea2skytuning.com
also send some basic information like if it uses map/maf/afm, disti or disti less.....

I know the other basics like its a 1.6L DOHC (it has DOHC right?) engine code 4A-FE.

Snafu
01-23-2005, 03:59 AM
Well, I can give you some of the generals now.

1.6L DOHC
Uses a map sensor (I will be buying your 2.5 bar map kit)
Disti
High impedence injectors
Manual (don't know if that really matters)


Anything else you need to know?

Weasy2k
01-23-2005, 04:32 AM
ok cool, jsut something i will put up on the website so people know the engine :)