PDA

View Full Version : A/F ratio



sbettencourt
08-11-2006, 04:15 AM
does anyone know what a/f ratio works the best, safest with 3sgte throught out the rpm range?
i have the SMT6

Dan3312
08-11-2006, 04:37 PM
From what I've been told around 11 - 11.5 I don't know myself.

andy
08-12-2006, 06:35 AM
yeap towards the upper 11s not over 12.2, thats how i run em

Gurr
08-12-2006, 08:10 PM
Depends on how your cooling is really. If you can cool your intake charges well you could probably get 13:1. Now, the best power afr's are 12.5 rich, 13.3 lean. So between those afr's will get you the most power for your set up. You just have to make sure your intake charges are low enough to keep detonation away.

sbettencourt
08-13-2006, 04:42 AM
is it the same a/f ratio troughout the rpm range?
should it be richer at higher rpm and close to stoichiometric and lower rpm?

ChrisD
08-13-2006, 03:12 PM
I'd tune for 11.5:1 under WOT. Partial throttle and cruise I'd go leaner.