PDA

View Full Version : Urethane motor mount insert now available for the 6th Gen Celica



kirkosaurus
08-08-2006, 01:49 AM
kirkosaurus urethane inserts are now available for the 94-99 Celica GT and ST.
All info can be found on the Urethane motor mount insert webpage (http://home.comcast.net/~kirkosaurus2/MR2_urethane_inserts.html).

KoreanJoey
08-08-2006, 01:51 AM
kirk, anything for the 90-93 GT?

kirkosaurus
08-08-2006, 01:57 AM
kirk, anything for the 90-93 GT?

Not yet. Some of the inserts we have may fit but the only one I can confirm for those years is the Alltrac.

Ricksta
08-08-2006, 04:02 AM
will it work on my 3sgte swap?

kirkosaurus
08-08-2006, 05:00 AM
will it work on my 3sgte swap?

what mounts are you using?

91 celica st
08-08-2006, 07:49 AM
anything for the 90-93 st?

kirkosaurus
08-08-2006, 12:35 PM
anything for the 90-93 st?

Not yet.

kirkosaurus
03-18-2008, 09:32 PM
anything for the 90-93 st?

Yes, we have them now.

ciento44
03-18-2008, 09:40 PM
90-93 GT/GT-S still isn't listed? :(

grayscale
03-19-2008, 01:13 AM
Did you read the other thread in the 5th gen forum? It said something about letting Kirk know what you want when you make your paypal payment. I think that's what I did, can't remember now, but he does have them.

celica9303
03-19-2008, 02:57 AM
Aren't the alltrac mounts and the 5g gt mounts the same?

celica9303
03-19-2008, 03:04 AM
Aren't the alltrac mounts and the 5g gt mounts the same?

grayscale
03-19-2008, 03:16 AM
No, the rear alltrac mount is different. You guys should check this thread out-
5th gen Kirkosaurus mounts (http://www.celicatech.com/forums/showthread.php?t=27059)

celica9303
03-19-2008, 10:04 PM
i will check it out, but bong used his 5sfe mounts with his swap and got the alltrac inserts from Speedsource.net and they worked, which is why i asked

kirkosaurus
03-19-2008, 11:45 PM
i will check it out, but bong used his 5sfe mounts with his swap and got the alltrac inserts from Speedsource.net and they worked, which is why i asked

That's because the outer ring is the same. With the SpeedSource inserts you're removing all the rubber and the center ring. With these inserts they slide over the existing rubber so you don't have to destroy your mounts or remove anything.

grayscale
03-20-2008, 01:42 AM
Thanks Kirk. I suppose those speedsource inserts are a bit on the extremely stiff side yeah? I'm very pleased with the ones I got from you, I don't like the idea of having to gut my mounts. Do you make any other products or have plans for any more?

Hookecho
03-20-2008, 02:26 AM
cannon, how do like a more stiff motor mount? do you have any vibrations? are you noticing that you get the power to the wheels better? i have a set that i filled with urethane a while back but haven't installed them yet. i'm all about getting the power to the ground quicker, but i don't much care for the teeth chatter.

celica9303
03-21-2008, 08:39 PM
ill be ordering dome of your mounts soon

tuner4life
03-21-2008, 09:13 PM
I can vouch for them, more vibration (only at idle), but alot better for putting the power down, less wheel hop, etc. The most noticeable difference is in the shifting, I dont feel the motor rocking back and forth when shifting anymore, makes everything alot smoother.

VikingJZ
03-21-2008, 11:40 PM
^I can contest to his car handling and driving better because of those.


make some for a 2JZGE!!

1EXQUIZITCELICA
03-26-2008, 04:04 PM
how much???