PDA

View Full Version : midpipes for st185. what are my choices?



wizzards581
07-23-2006, 08:03 AM
im looking for a 3" midpipe to mate with the 3" DP. whats out there?

burnyd
07-23-2006, 10:18 AM
Best bet is to bring that alltrac to an exhaust shop have them make you one.

d1alltrac
07-23-2006, 10:47 AM
the mid-pipe isnt a hard piece, an exhaust shop could probably do a pretty decent job on one.

as far as bolt on goes the only 2 i know of are the aussie and the ap engineering. i have an AP engineering one and im pretty happy with it but they are probably hard to get now since the demand was never that great and i dont think they sold very well.

if i were you i would spend the cash on an aussie but there wouldn't be anything wrong with having one made at some local exhaust shop either

wizzards581
07-23-2006, 04:18 PM
i seen most st185 here pretty much modified. are they custom midpipes?

usually muffler shops here wont do pieces that go over chasis bars (whatever that part is called). are Aussie easy to get and its all 3" manderal?

balagast
07-23-2006, 04:51 PM
the aussie;s are easy enough to get ... you can order them, but they are a bit pricy.

http://www.aussie-speed.com/

alltracman78
07-24-2006, 02:36 AM
Yes, it's 3" mandrel bent.
I have the complete system on my car.
It sounds INCREDIBLE....
They have good customer service too.... :)

wizzards581
07-25-2006, 02:09 AM
Aussie is the only available now? SSAC seems to have a kit but would they sell midpipe seperately, if i ask?

the 3" midpipe will bolt up with stock pipes?

ChrisD
07-25-2006, 05:33 AM
I have an Aussie midpipe, very nice peice but kind of pricey. For what the aussie costs you could buy the SSAC and pay to have it rewelded if it ever cracked, and still come out ahead.

punch
07-25-2006, 06:17 AM
check this out http://www.6gc.net/forums/index.php?showtopic=39538