PDA

View Full Version : So, what is the 5th gen Celica made out of?



2kSnakEater
07-17-2006, 05:36 PM
I have worked out a deal with Ricksta and I will be getting the Entire front parts that I need to fix the All-Trac. I have an 18v Dewalt saw zaw and with this tool I was thinking of just cutting the entire front section of the GTS with the Radiator support still attached, I dont need the frame rails but I will be cutting about 1 or 2 inches of it so I can take it home and cut them off to exactly to what I need. The question is can I do this with that saw zaw?

2kSnakEater
07-17-2006, 05:42 PM
this is what I have to cut with:

http://www.homedepot.com/cmc_upload/HDUS/EN_US/asset/images/eplus/028877478708_4.jpg

davmac
07-17-2006, 06:34 PM
You may need a few batteries and a few blades, but I can't think of a material on the Celica that wouldn't give way to a sawzall.

Murgatroy
07-17-2006, 06:54 PM
A Sawzall can cut through anything. Be sure to get some good blades though.

3sgte@daspeedof
07-17-2006, 07:52 PM
Good blades and yes it should do the job, we cut a 92 gts into 6 peices a while back. It will be fun

Ricksta
07-17-2006, 10:05 PM
were taking my whole front end now eh? hows this fitting in the trans am?

2kSnakEater
07-17-2006, 10:09 PM
noooo, its got to stay small. Im not taking the whole front end as in a "clip" you buy with the engine, Im taking just past the radiator support

Ricksta
07-17-2006, 10:13 PM
ok now your def helping with the water pump for that price!!!

2kSnakEater
07-17-2006, 10:26 PM
lol, I will be happy to help. Iv just got to get back that same day.

ciento44
07-17-2006, 10:45 PM
The 5th gen celica is made of paradoxal amounts of win and fail.

Ricksta
07-17-2006, 10:54 PM
tryin to do it all in one saturday? should stay over we'll hit up the beach. this is where the real ocean is at fuck that gulf of mexico shit

2kSnakEater
07-17-2006, 10:56 PM
I was on vacation last week, Iv had my share of the atlantic thank you. I also have the swimers ear drops to prove it, but damm was it fun!

alltracman78
07-18-2006, 01:18 AM
The only place I can see you haveing trouble is the frame rails.
They are higher grade steel than the rest. Your sawzall will cut it, but it might take a while, a few blades, and a few batteries.
Everything else is thin steel. Should go through easy.


The 5th gen celica is made of paradoxal amounts of win and fail.

:laugh:

Great quote