PDA

View Full Version : well got a update on the 5sfte



Mister2T
06-26-2006, 01:23 PM
http://video.google.com/videoplay?docid=3773131809586729770

http://www.celicatech.com/gallery/files/1/3/6/turbooncar_200489.JPG

and I got a set of wheels off a buddy for 200 bucks plus a xbox here they are on the car.

http://www.celicatech.com/gallery/files/1/3/6/newwheels.JPG

4thgenceli
06-26-2006, 01:39 PM
At least it's running!


Congrats mang!

Mister2T
06-26-2006, 01:43 PM
yep just need to run the intercooler piping and then get it tuned

mtp_69_i
06-26-2006, 01:49 PM
you've got no lights.

:bigthumb: glad it's all working out

presure2
06-26-2006, 04:41 PM
is that a brass oil take off fitting, and RUBBER oil feed line??
good luck.

TurboGTS22
06-26-2006, 05:40 PM
nice man! what kind of exhaust r u running?

toyotatuner
06-26-2006, 06:07 PM
you are a brave man for running what appears to be brass fittings and rubber hoses for your oil lines.

Mister2T
06-26-2006, 06:53 PM
1st off i have a steel T, just have to get it threaded correctly, the oil feed is the same hose used on heavy machinary, if it does good on them i dont think ill have a problem, its rubber over breaded. It has a burst pressure of up to 5000psi, and like i said if rubber melts there is breaded under it, very expensive hose, parker hose check into it

Punisher
06-26-2006, 07:00 PM
Hmm yes Parker is good shit.

Lagos
06-26-2006, 07:18 PM
1st off i have a steel T, just have to get it threaded correctly, the oil feed is the same hose used on heavy machinary, if it does good on them i dont think ill have a problem, its rubber over breaded. It has a burst pressure of up to 5000psi, and like i said if rubber melts there is breaded under it, very expensive hose, parker hose check into it


its not the psi that will kill the hose, its the heat. dont risk blowing your motor over some cheap ass hose.

toyotatuner
06-26-2006, 08:02 PM
rubber+ heat= bad.

Id save up for some stainless steel lines, oil supply is one area not to skimp on.

good job so far though!

Mister2T
06-26-2006, 08:36 PM
it is breaded, just has rubber over it!

AznKlique
06-26-2006, 09:07 PM
oh no...is that a walmart battery I see?

toyotatuner
06-26-2006, 10:11 PM
OH its braided. gotcha. i have no clue what breaded was. gotcha.

presure2
06-26-2006, 11:01 PM
what size is that hose? I/D?
you do know that the housing on the turbo WILL get in excess of 800*?
i'd get that steel fitting on there ASAP.
if the hose is any bigger than 3/16"ID, its too big.

Mister2T
06-27-2006, 01:16 AM
its 3/16 and im not driving teh car, the video is the only time it was started.

RedPhoenix
06-27-2006, 04:55 AM
lol for one.. looks good... but use all steel braided... my car caught fire because of that..

bloodredgt
06-27-2006, 04:58 AM
wow... so many people are going turbo on their 5sfe. Awesome.