PDA

View Full Version : need some suggestions



JCMIRAL
06-03-2006, 11:38 PM
need hi impedance fuel injectors for my 5sfte project i'm almost done buying everything but getting hung up on buying injectors i want 550-700cc just to let you guys know got any suggestions on where to get them.

Bryan

angryyoungnpoor
06-04-2006, 01:25 AM
What is your setup? If you're using that ct26, there's no need for that kinda pressure. The rx7 or dsm upgraded injectors may work as the stock one's do. Check 'em out.

JCMIRAL
06-04-2006, 01:41 AM
weisco 8.5:1 forged pistons ,toga performance rings, wrist pins, thrust washers, main bearings, rod bearings, expansion plugs. eagle rods, garrett gt2871r, greddy emanage ultimate, ngk bkr7e plugs, magnecor comp wires, 28x7.5x3 intercooler 2.5in/out, northern cool heavy duty radiator, spec stg 3 clutch, fidanza flywheel, diy CAI, apexi avcr boost controller, hks universal ssqv bov, and ported head, and knife edged crankshaft. when i'm finished i will be using red line lubing and cooling products.

burnyd
06-04-2006, 01:50 AM
JCMIRAL I would honestly like to see some pictures of this setup.... especially a gt2871 on a 5s.

JCMIRAL
06-04-2006, 01:55 AM
i haven't put it on yet i have to finish buying some parts it's all in my garage or on order but i swear to christ when i am finish would be honored to show you guys.

JCMIRAL
06-04-2006, 01:58 AM
when i have everthing i will take pics of everything to show you guys

burnyd
06-04-2006, 02:17 AM
so your telling me you bought weisco 8.5:1 forged pistons ,toga performance rings, wrist pins, thrust washers, main bearings, rod bearings, and a gt2871 for a 5s motor? Why didnt you just swap? You wouldnt of had to touch internals? And Im assuming this is on a solara?

JCMIRAL
06-04-2006, 03:06 AM
want to do something different i know a 3sgte would be easier but i like a good challenge do you have any injector suggestions.

burnyd
06-04-2006, 08:37 AM
yah take what you paid for sell it and buy a 3s it has way more potential than a 5s motor.. hands down. Your not going to get very far even with a built motor.

Luckynumber5
06-04-2006, 02:58 PM
^ I think thats beside the point, how much power are you looking to put down with that gt28?

TurboGTS22
06-04-2006, 05:59 PM
burnyd i dont mean to hate but let the man do what he wants. take it easy on the 5s hating man. lol nobody thought the 5s could do anything until pressure2 really opened her up. so let the man prove u and many others wrong. maybe hehe

nuclearhappines
06-04-2006, 06:13 PM
pressure 2 ?

u guys are new

mike colon had a 560 rear wheel hp 5sfte mr2 some 7 years ago. It ran 10s too.

RC engineering ... top feed, high impedance

TurboGTS22
06-04-2006, 06:22 PM
ok nuke. lol but that proves the point that 5sfes are capable

JCMIRAL
06-05-2006, 03:40 AM
i think i have a pretty good chance to be around 350-400hp with basic e-mange tuning but i wait to fine tune when i throw it on the dyno

andy
06-06-2006, 06:25 AM
thats is awesome man. more power to the 5sfte!!!!!!!