PDA

View Full Version : Cams



andy
04-19-2006, 06:37 AM
anybody tried any of the performance cams put out for the 22re engine, i was thinking of getting one.

85gtsblackman
04-22-2006, 05:04 AM
im waiting on another batch to pop up on ebay
there were some for 65 bucks floating around then they all vanished

85gtsblackman
04-25-2006, 03:28 AM
there back

im debating getting a 268 degree cam

yotas4life
04-25-2006, 03:40 AM
do it, my friend had a 22re from lc engineering w some 268 cams, shit was FAST

85gtsblackman
04-26-2006, 04:56 AM
ill probally do it last on my before june to do list

i still have to get and install from dynamic73 his celica supra hatch, dash, and o2 sensor from him

then, the downpipe on the 22re is really restrictive, its crushed down to only like a 1/2 inch or so, so im getting that replaced when i get my exaust system done

then ill get the 268 degree cam

david in germany
04-26-2006, 06:34 AM
I can tell you what a cam did for my 4 runner..
Before the the install I had a place I liked to climb, I had to hit the hill in 2nd gear in low range 4x4 and would need to down shift before the top to make it.
After the install I could take the same hill in 1st gear high range (not reving it out) and still had power to spare. I will get you a link if you have interest for a guy that builds som great stuff for 22re's. A cam is the fastest way to pull power out of a 22re.

Here you go
http://www.engnbldr.com/

85gtsblackman
04-28-2006, 12:56 AM
yeah untill i get another engine to rebuild, im just going to go,this route


reseal exterior engine as much as possible, cai, exaust, modded downpipe, cam, mod the upper manifold (its got an area that can be ground away for more air flow) and block off egr due maily to mine is dead

should get decent results

85gtsblackman
05-24-2006, 04:36 AM
gonna get an lc engernering stage 1 cam for 60 dollars from a friend, brand new cam never installs just drops in :D