View Full Version : C60 + 1st Gen 3SGE HELP!

01-29-2006, 02:55 AM
Ok folks how much trouble am I looking at trying to throw a c60 in a 4th gen gts with a 1st gen 3sge? Flywheel? Clutch? Axles? (Cringe). I need to keep this on the cheap if I can. It is for the race car. I have next to no data on the 7th gen.

01-29-2006, 03:16 AM
Well, I would guess you start with a custom bell housing....
You shouldn't have to change the flywheel, or the presure plate. But you would need a 7th gen clutch disc...
And of course custom axles. IF you can make them...
7th gen inners with 4th gen outers....

This is all supposition btw.
I've never messed with a 7th gen.

02-02-2006, 09:41 PM
holy crap, that is not the tranny you want to use...the C60 is a very weak transmission. look at moy many 7th gens have trouble. if you have a 1st gen 3S0GTE in there then why not bolt up a MR2 Turbo tranny...it should bolt right up

02-02-2006, 09:52 PM
it does...