PDA

View Full Version : Look for a clutch/flywheel combo.



3sgte@daspeedof
01-20-2006, 03:38 AM
These are the clutches I've been looking at where I can get a clutch & flywheel for under 600 not including shipping, looking for opinions or experience with any of these clutches, and if not these then something else you might recommend.

Spec stage 2 clutch
RPS 6puck sprung \Toda or FIDANZA
ACT 6 puck unsprung \Toda or FIDANZA
Blitz active clutch & flywheel
LuK stage1 clutch \Toda or FIDANZA
Clutchmaster stage 4, 6 puck spring \ Toda or Fidanza
theres also the exedy clutch off of ebay

angryyoungnpoor
01-20-2006, 05:26 AM
http://cgi.ebay.com/ebaymotors/EXEDY-Clutch-FIDANZA-Flywheel-CELICA-MR2-TURBO-3SGTE_W0QQcmdZViewItemQQcategoryZ33564QQitemZ80309 45224QQrdZ1 eh?

Look on ebay, there's bunches. for cheaper than 600...

3sgte@daspeedof
01-20-2006, 07:52 AM
but no I'm looking at a flywheel too, most flywheels will run 250 to 300 on its own.

kpdvx
01-20-2006, 07:58 AM
http://www.napaonline.com/masterpages/NOLMaster.aspx?PageId=470&LineCode=NNC&PartNumber=50108&Description=Flywheel

This is for the 5SFE.

KoreanJoey
01-20-2006, 09:28 AM
He said lightened flywheel... that looks like just a stocker.

alltracman78
01-20-2006, 03:59 PM
You will not find a GOOD QUALITY lighter flywheel and clutch brand new for the 3SGTE.
Unless someone gives you a private hook up.

From my experience and what I've read, go with Spec or Clutchmasters.
I had pretty good experience with an Exeddy clutch disc, but it was mated to a CM stage 3 pressure plate....
Also, HKS is supposed to make a good clutch.
And Blitz.

One word of warning with the ACT. There have been alot of people that have had to get a longer slave cylinder piston along with that particular clutch...

The Exeddy one on Ebay is for an OEM replacement.
So if you're trying to upgrade, that's not it....

3sgte@daspeedof
01-20-2006, 06:59 PM
thanks for the info, I'm leaning towards the spec stage 2 with the fidanza flywheel run me about 500 and change and yes its a hook up.

3sgte@daspeedof
01-20-2006, 07:00 PM
just need to get alltrac outer axels and I'll have lsd and be driving again