View Full Version : How many Aftermarket EMS users here?

12-22-2004, 06:50 AM
Post if your using an standalone EMS...
Brand, model, injector size, and any details you care to share.

I'll start,
AEM 1121
315 primaries 465 secondaries
3 bar GM map sensor and IAT
Ford IAC


12-22-2004, 07:54 AM
Used to have:

Stock 4afe injectors

Was going to run greentop 315's with my turbo setup, however things chagned :)

Has built in 2.5 bar map, all sensor imputs calibrated for toyota (denso) sensors.

Got car to run well by myself, then decided to sell car. Very good DIY kit, and for the price, I don't see why more of us don't use it!

12-29-2004, 02:08 PM
1 bar gm map, bosch temp sensors.

I haven't got the whole thing installed. Mainly because i don't have the time. I think this is one of the better kits out there. The guys at sds are great to deal with. The sds unit, coil, and programmer, look great and looks like tuning shouldn't be too bad.

I still need to finish the install, but i can turn the car on and play with the sds. I'm going to get a wide-band o2 kit with a 1 volt output so the sds can run in closed-loop mode fine, and i can still have the wide-band readout for tuning.

I'm not setting this car up for daily driving, i'm setting it up to see what you really can do with a 3S-GE, and to see if its a better n/a route to take then to build up a 5S-FE.


01-05-2005, 02:10 AM
greddy e-manage
stock 5sfe wit i/e, stokc injectors

slightly tuned, dont wanna mess with it much till i get an egt

01-09-2005, 05:58 AM
When I meant engine management, I meant the standalone...
IE- rip out the OEM computer and replace it with an aftermarket programable unit. E-man is a piggyback...

SDS is cool, just not enough features/output for me...
I want my EMS to make me a cup of coffee AND a toast :D

01-12-2005, 03:17 AM
my bad i didnt see the stand alone part

01-14-2005, 05:16 PM
Haltech E6K
540cc injectors

Pain in the ass might I add.

- aba

01-16-2005, 05:55 AM
Haltech E6K
540cc injectors

Pain in the ass might I add.

- aba

LOL I've said that for time to time about my E6K (other car) :bigthumbu They are a bit of a pain to program unless you have somebody else drive and a good chunk of time.

01-17-2005, 12:39 AM
Sds Em4.

01-17-2005, 12:57 AM
Sds Em4.

Ummm... Please post numerous pics of your car in the members ride section, as well as some time slips, dyno charts if you would please :) Sounds like quite the beast!

01-17-2005, 01:45 AM
OK, doing it now.


01-29-2005, 08:21 AM
Autronic EMS

780cc injectors

self tuned

Super Shadow
02-10-2005, 04:25 AM
Hey guys I have a 1990 Celica ST w/ the 4A-FE Engine w/ manual tranny. I was wondering would I be able to use the AEM Plug and Play programmable EMS part #30-1120 and program it without boost and retarded timing. Because it is the same model year, just a different engine.

02-10-2005, 04:57 AM
Nope, the engine matters more than the year.